Measuring system SI SENSE Sensor Level gauges, level sensors, etc.
The measuring system SENSE (SI SENSE) is designed to measure (control) the parameters of liquid and gaseous media and automate technological processes in the oil and gas, chemical, food and other industries. The system consists of separate components connected to each other by a common communication line-power supply and exchanging information via the digital SENSE protocol.
The composition of the measuring system: level gauges, level sensors, temperature sensors, pressure sensors, gas analyzers, control buttons, indicating devices, adapters, power supplies and switching units, light and sound signaling devices, control cabinets, software.
Showing devices
Signaling devices MS-K-500, VS-K-500 (SI SENSE) are used as part of the measuring system “SENSE” to perform the following functions:
- display of values of measured, controlled parameters,
- settings (calibration, programming) of system devices (sensors and secondary devices)
Signaling devices MS-K-500, VS-K-500 (SI SENS). Technical description.
Signaling devices MS-Sh-8X8, MS-Sh-8X8-VZ (SI SENSE) are used as part of SI SENSE to indicate the relative filling of tanks, up to 8. They are used complete with level gauges PMP-118, PMP-128, PMP-201 or level sensors PMP-185.
The signaling devices are scale MS-Sh-8X8, MS-Sh-8X8-VZ (SI SENSE). Technical description.
The VS-Sh-40 scale alarm (SI SENSE) is used as part of SI SENSE with PMP-118, -128, -138, -201 level gauges to indicate the relative filling of the tank with an interval of 1.25% of the total volume (80 values).
The signaling device is a scale VS-Sh-40 (SI SENSE). Technical description.
Adapters
LIN-RS232, LIN-RS485, LIN-USB (SI SENSE) adapters are designed to connect SI SENSE to a computer, controller via RS-232, RS-485, USB interfaces for data exchange via SENSE and ModBus-RTU protocols. The SENS protocol is used to exchange data and configure SI SENS devices. According to the ModBus RTU protocol, data exchange (the adapter is a slave in the ModBus network).
Adapters LIN-RS232, LIN-RS485, LIN-USB (SI SENSE). Technical description.
LIN-MODEM adapters (SI SENSE) are designed for remote data transmission and remote access to SI SENSE using modems: wired (telephone), wireless (radio modems) and GSM modems.
LIN-MODEM adapters (SI SENSE). Technical description.
LIN-RS232-ETHERNET, LIN-RS232-220V-ETHERNET, LIN-RS485/232-ETHERNET (SI SENSE) adapters are designed for remote access to the measuring system “SENSE” (SI SENSE) on computers connected to the enterprise network or the Internet.
Adapters LIN-RS232-ETHERNET, LIN-RS232-220V-ETHERNET, LIN-RS485/232-ETHERNET (SI SENSE). Technical description.
LIN-4-20 MA adapters (SI SENSE) are designed to convert the value of the measured parameter of the SI SENSE sensor into a 4-20 mA current loop signal. The adapters have a built-in power supply that provides power to the sensors in the SI SENSE line.
LIN-4-20 MA adapters (SI SENSE). Technical description.
Power supplies, switching
Power supplies BP-9V-... (SI SENSE).The power supply of SI SENSE devices (sensors and secondary devices) is carried out from DC sources. The standard supply voltage, from the point of view of minimizing power consumption, is 9 V. However, with a significant length of the line, taking into account the voltage drop on the wires, it is possible to power the system from 12V (most devices have a range of supply voltages (5 ... 16) V.
Power supplies BP-9V-... (SI SENSE). Technical description.
Switching units BK-... (SI SENSE) are designed to control actuators by switching relay contacts based on signals from sensors of the measuring system “SENSE” (SI SENSE). Each relay of the switching unit can be programmed to trigger from one or more values of various measured parameters of one or more sensors.
Switching blocks BK-... (SI SENSE). Technical description.
Switching units BOD-... (SI SENSE) are designed to power devices and control actuators by switching relay contacts based on sensor signals of the measuring system “SENSE" (SI SENSE). Switching power supplies with the index “-GS” are also equipped with an output for connecting the VS-3-12V siren.
BOD switching blocks-... (SI SENSE). Technical description.
The composition of the measuring system: level gauges, level sensors, temperature sensors, pressure sensors, gas analyzers, control buttons, indicating devices, adapters, power supplies and switching units, light and sound signaling devices, control cabinets, software.
Showing devices
Signaling devices MS-K-500, VS-K-500 (SI SENSE) are used as part of the measuring system “SENSE” to perform the following functions:
- display of values of measured, controlled parameters,
- settings (calibration, programming) of system devices (sensors and secondary devices)
Signaling devices MS-K-500, VS-K-500 (SI SENS). Technical description.
Signaling devices MS-Sh-8X8, MS-Sh-8X8-VZ (SI SENSE) are used as part of SI SENSE to indicate the relative filling of tanks, up to 8. They are used complete with level gauges PMP-118, PMP-128, PMP-201 or level sensors PMP-185.
The signaling devices are scale MS-Sh-8X8, MS-Sh-8X8-VZ (SI SENSE). Technical description.
The VS-Sh-40 scale alarm (SI SENSE) is used as part of SI SENSE with PMP-118, -128, -138, -201 level gauges to indicate the relative filling of the tank with an interval of 1.25% of the total volume (80 values).
The signaling device is a scale VS-Sh-40 (SI SENSE). Technical description.
Adapters
LIN-RS232, LIN-RS485, LIN-USB (SI SENSE) adapters are designed to connect SI SENSE to a computer, controller via RS-232, RS-485, USB interfaces for data exchange via SENSE and ModBus-RTU protocols. The SENS protocol is used to exchange data and configure SI SENS devices. According to the ModBus RTU protocol, data exchange (the adapter is a slave in the ModBus network).
Adapters LIN-RS232, LIN-RS485, LIN-USB (SI SENSE). Technical description.
LIN-MODEM adapters (SI SENSE) are designed for remote data transmission and remote access to SI SENSE using modems: wired (telephone), wireless (radio modems) and GSM modems.
LIN-MODEM adapters (SI SENSE). Technical description.
LIN-RS232-ETHERNET, LIN-RS232-220V-ETHERNET, LIN-RS485/232-ETHERNET (SI SENSE) adapters are designed for remote access to the measuring system “SENSE” (SI SENSE) on computers connected to the enterprise network or the Internet.
Adapters LIN-RS232-ETHERNET, LIN-RS232-220V-ETHERNET, LIN-RS485/232-ETHERNET (SI SENSE). Technical description.
LIN-4-20 MA adapters (SI SENSE) are designed to convert the value of the measured parameter of the SI SENSE sensor into a 4-20 mA current loop signal. The adapters have a built-in power supply that provides power to the sensors in the SI SENSE line.
LIN-4-20 MA adapters (SI SENSE). Technical description.
Power supplies, switching
Power supplies BP-9V-... (SI SENSE).The power supply of SI SENSE devices (sensors and secondary devices) is carried out from DC sources. The standard supply voltage, from the point of view of minimizing power consumption, is 9 V. However, with a significant length of the line, taking into account the voltage drop on the wires, it is possible to power the system from 12V (most devices have a range of supply voltages (5 ... 16) V.
Power supplies BP-9V-... (SI SENSE). Technical description.
Switching units BK-... (SI SENSE) are designed to control actuators by switching relay contacts based on signals from sensors of the measuring system “SENSE” (SI SENSE). Each relay of the switching unit can be programmed to trigger from one or more values of various measured parameters of one or more sensors.
Switching blocks BK-... (SI SENSE). Technical description.
Switching units BOD-... (SI SENSE) are designed to power devices and control actuators by switching relay contacts based on sensor signals of the measuring system “SENSE" (SI SENSE). Switching power supplies with the index “-GS” are also equipped with an output for connecting the VS-3-12V siren.
BOD switching blocks-... (SI SENSE). Technical description.
All Sensor products
Measuring system, level gauges, level signaling sensors, pressure and temperature sensors, gas analyzers, sirens, signaling devices, electric contact pressure gauges, shut-off and control valves, push-button control posts, electromagnetic and bottom speed valves, information boards, grounding devices of tankers, enclosures, connecting boxes
About Sensor
LegalThe company was founded in 1992. NPP SENSOR (Zarechny) is a full—cycle enterprise, developer and manufacturer of a wide range of sensors and instrumentation, automation equipment, explosion-proof electrical equipment, pipeline fittings with remote control.
-
OBJECTS OF APPLICATION
Oil refineries, filling terminals for automobile tanks, tanks, tank containers, including for liquefied petroleum gases, aggressive media, gas stations, nuclear power plants, etc. -
CUSTOMER ORIENTATION
Development of products according to individual tasks. Prompt and professional solution of tasks offered by clients, mobility, the use of the latest progressive technologies. -
EXTENSIVE GEOGRAPHY
More than 5000 customers in Russia and the CIS. The products are used by all the largest Russian oil and gas companies. The number of clients of the enterprise is constantly increasing.
Information Board Sensor
Learn more about our products Sensor.
- (7273)495-231
- (3955)60-70-56
- (8182)63-90-72
- (8512)99-46-04
- (3852)73-04-60
- (4722)40-23-64
- (4162)22-76-07
- (4832)59-03-52
- (8352)28-53-07
- (351)202-03-61
- (8202)49-02-64
- (3022)38-34-83
- (395)279-98-46
- (4932)77-34-06
- (3412)26-03-58
- (4012)72-03-81
- (4842)92-23-67
- (843)206-01-48
- (3842)65-04-62
- (4212)92-98-04
- (8332)68-02-04
- (4966)23-41-49
- (4942)77-07-48
- (861)203-40-90
- (391)204-63-61
- (3522)50-90-47
- (4712)77-13-04
- (4742)52-20-81
- (3519)55-03-13
- (495)268-04-70
- (8152)59-64-93
- (8552)20-53-41
- (831)429-08-12
- (3843)20-46-81
- (383)227-86-73
- (3496)41-32-12
- (3812)21-46-40
- (4862)44-53-42
- (3532)37-68-04
- (8412)22-31-16
- (342)205-81-47
- (8142)55-98-37
- (8112)59-10-37
- (863)308-18-15
- (4912)46-61-64
- (812)309-46-40
- (846)206-03-16
- (8342)22-96-24
- (845)249-38-78
- (8692)22-31-93
- (3652)67-13-56
- (4812)29-41-54
- (862)225-72-31
- (8652)20-65-13
- (3462)77-98-35
- (8212)25-95-17
- (4752)50-40-97
- (8482)63-91-07
- (3822)98-41-53
- (4872)33-79-87
- (4822)63-31-35
- (3452)66-21-18
- (347)229-48-12
- (3012)59-97-51
- (8422)24-23-59
- (8672)28-90-48
- (4922)49-43-18
- (423)249-28-31
- (844)278-03-48
- (8172)26-41-59
- (473)204-51-73
- (4112)23-90-97
- (4852)69-52-93
- (343)384-55-89